Helper, Rigger, Scaffolder, Cable Terminator, Touch Up Painter, and more
EDC-EGC-FNS-Sawiq-Haibat-Al Harakha has announced an urgent manpower requirement dated 22 September 2026 for multiple trades across projects in Saudi Arabia. The recruitment covers Cable Terminators, Touch Up Painters, TUV Riggers, Scaffolders, Helpers, Fabricators, Masons, Carpenters, and Steel Fitters. The advertised rates range from SAR 9 to SAR 22 per hour, depending on the trade and project assignment. Several vacancies are connected with new projects in locations including Abqaiq, Turif, Marjan, Riyadh, and the Jeddah-Rabigh area. The notice also highlights strict documentation requirements and specifically warns candidates not to report with duplicate or expired Iqamas or altered Iqama dates. Applicants should ensure their documents are genuine, valid, and suitable for the relevant project before approaching the supplier.
Responsibilities Across Trades
The responsibilities will depend on the selected trade and project assignment. Cable Terminators will handle cable termination-related activities according to project specifications and applicable electrical work procedures. Touch Up Painters will carry out finishing and corrective painting work, including surface touch-ups where required. TUV Riggers will support lifting and rigging activities under approved procedures, while Scaffolders will assemble, modify, and dismantle temporary access structures safely. Helpers will assist skilled trades with general site duties, material handling, and housekeeping. Fabricators will perform fabrication-related activities according to drawings and site requirements. Masons, Carpenters, and Steel Fitters will support civil, formwork, structural, and installation activities respectively. All workers are expected to follow site instructions, safety requirements, and supervisor directions.
Skills, Documentation & Compliance
Candidates should have practical experience relevant to their selected trade and be capable of performing site-based industrial or construction work. The Rigger TUV vacancy specifically requires Chamber documentation, while the Fabricator position in Turif also requires Chamber. The Jeddah-Rabigh Mason requirement is limited to candidates with an original Iqama and QIWA contract. The recruitment notice clearly states that candidates should not come to work using a second or duplicate Iqama, an expired Iqama, or an Iqama whose date has been improperly extended by the individual. Applicants should therefore verify that their documents are authentic and valid before mobilization. Candidates should also confirm the applicable project requirements, trade certification, medical or site-access conditions, and contract terms directly with the supplier.
Project Locations & Working Environment
The advertised manpower is distributed across several project environments. The Cable Terminator position is listed for the Riyadh Project, while Touch Up Painter work is described as room-to-room. The TUV Rigger vacancy is for a new Abqaiq project with food and accommodation free and Chamber required. A separate Helper requirement is also marked for a new project with food and accommodation free. The Fabricator position is listed for Turif, and another Helper requirement is associated with a new Marjan project. For Jeddah-Rabigh, the Mason vacancy requires an original Iqama and QIWA contract, with the notice stating that the bus is scheduled to depart for Jeddah at 1:30 PM the following day. Candidates should confirm their exact site, reporting arrangements, accommodation, transportation, and project conditions before mobilization.
Trade-Wise Vacancy Details
Date: 22 September 2026
Recruitment: Urgent Requirement
1. Cable Terminator
Quantity: 10 Nos.
Rate: 16 SAR/Hour
Site: Riyadh Project
2. Touch Up Painter
Quantity: 10 Nos.
Rate: 14 SAR/Hour
Requirement: Room to Room
3. Rigger TUV
Quantity: 15 Nos.
Rate: 13 SAR/Hour
Site: Abqaiq New Project
Benefits/Requirement: FAT Free, Chamber Required
4. Scaffolder
Quantity: 20 Nos.
Rate: 14 SAR/Hour
5. Helper
Quantity: 30 Nos.
Rate: 10 SAR/Hour
Requirement: FAT Free, New Project
6. Fabricator
Quantity: 10 Nos.
Rate: 22 SAR/Hour
Site: Turif
Requirement: Chamber Required
7. Helper
Quantity: 10 Nos.
Rate: 10 SAR/Hour
8. Helper
Quantity: 10 Nos.
Rate: 9 SAR/Hour
Site: Marjan New Project
9. Mason
Quantity: 5 Nos.
Rate: 13 SAR/Hour
Site: Jeddah-Rabigh
Requirement: Original Iqama & QIWA Contract Only
10. Carpenter
Quantity: 30 Nos.
Rate: 13 SAR/Hour
11. Steel Fitter
Quantity: 10 Nos.
Rate: 13 SAR/Hour
Contacts:
Rasel: 0573419597
Nayem: 0510584952
Omar: 0539986240
Arshad: 0558176948
Office: Sohag Supply
Office Location:
View Office Location
Applicant Verification & Safety Notice
Applicants should review the relevant trade requirement carefully and contact the listed representatives directly before traveling to the office or preparing for mobilization. The supplied notice specifically warns against reporting with a second-number Iqama, an expired Iqama, or an improperly altered Iqama date. Candidates should use only genuine and valid documentation and verify the applicable Chamber, QIWA, project, and contract requirements before proceeding. Ask for proper job and company documents and confirm the exact salary, working conditions, food and accommodation arrangements, transportation, project location, and payment terms. Do not pay anyone who demands money in exchange for job selection, registration, mobilization, or employment. Candidates should remain alert to recruitment fraud, verify the supplier and project information, and follow the official documentation process.
